Diamond Chainsaw Application

Chain saw solution

The chain is designed to cut concrete, reinforced concrete, cinder blocks and masonry (including bricks, asphalt and soft stone such as sandstone). Cutting hard stone such as granite and ductile iron pipe are also approved applications but will reduce the service life of the chain.

Installation instruction and using tips:

1.To reduce chain stretch and tension downtime.

2.Oil the chain at the end of the use to prevent rust but be carefull not to over tension.

3.When pulling the chain around the bar by hand, do not touch it with thumb or forefingers, because the bar rails is very sharp.

4.Grab only the diamond segment.

5.Always pull the chain away from the wall walker, whose point is also pretty sharp.

6.Turn the engine off before tensioning the chain.

When you choose the chain saw, advising it is including 1 set Chain Saw, 1 pc Guide Bar and 2 pcs Diamond Chain Blade.